AFS Pro Carbon Wingfoil Board

AFS Pro Carbon Wingfoil Board

GWA approved - Supplied Board only

Ultra-compact board for demanding riders. The shape and construction have been carefully developed to reduce the board's inertia, which can so easily limit your freestyle rotations or waveriding turns.
It's also perfect for racing in moderate to strong conditions.

Features:

HIGHLIGHTS
Compact, powerful shape
Nose bulb
Hollow deck shape
Triaxial carbon construction
Front and Rear Foostrap inserts for Y configuration

DIMENSIONS
Volume (L) Length Width (cm) Construction Box F/S Inserts Weight (kg)
52 4'5/134.6 cm 21? 1/16 /53.4 cm Triaxial carbon Double rail US Yes 4,8
70 5'0/152.4 cm 23?/58.5 cm Triaxial carbon Double rail US Yes 5,2
100 5'8/172.7 cm 25?/63.5 cm Triaxial carbon Double rail US Yes 6

PROGRAM
Freeride performance / Race / Slalom / Freestyle / Waveriding

The board is supplied ready to use, but without Footstraps/screws, Bag and Leash - These are available for separate purchase.

These Boards are built to order in France - we try to have some boards already in the order system, and have some stock in hand, but in the event that we do not, it can take as long as 8 weeks for a board to be built.

WARRANTY
This product comes with a three-year warranty, subject to our fair usage policy.

How to use the product

SHOULD I RINSE MY BOARD?

We recommend rinsing the board after each session and drying it out of the cover before storing it. This way, the decorations will last longer and you'll avoid osmosis and mould.

WHAT IS THE PURPOSE OF THE DECOMPRESSION SCREW?

The air vent screw is located on your board. It's very important because it regulates the pressure inside the board, which can increase with temperature or altitude. If this pressure is not regulated, it can damage your board. It is therefore crucial to open this screw when storing the board, especially in hot places such as a car or a sunny beach. The Manual Air Vent (Decompression) Screw is easily identified by being Silver, Round, with a large Screwdriver slot in the head.

Some of our models have an Automatic Decompression screw - this can easily be identified by being Black, Hexagonal and has no Screwdriver Slot in the head
If you have an automatic decompression screw, you don't need to do anything - the board regulates itself.

HOW DO I FIT A LEASH ROPE?

Start by inserting the black rope supplied with the leash into the plug at the tail of the board. Leave a little length to prevent the leash from rubbing directly on the tail and finish off with a small knot.

HOW DO I INSTALL THE STRAPS?

To install the straps, place them in a V-shape in the predefined holes using the appropriate screws supplied when you buy AFS straps. It's very important to use the screws supplied, as their length and diameter are adapted to the inserts in our boards. Make sure you insert the screws straight and not askew. You can also use anti-twist to prevent the strap from turning around the screw. When it comes to adjustment, there are two schools of thought: those who put the whole foot in by opening the straps completely, and those who put only half the foot in by tightening the straps more. This will help to get the foot out more easily in the event of a fall. It all depends on your morphology and taste.